Products

10:1Potting Adhesive

Item No.: MT-1801
It mainly used in circuit boards, LED power supply, LED outdoor lamps, automotive electronic modules, electrical appliances, light sources, lighting and ancillary devices for potting protection,and play the role of sealing, waterproof, insulation
INQUIRY
Description
Introduction

Two-component silicone is distinguished and named for the single component silica gel.This product consists of two compnents and cures after mixing the two components in the right proportion.Generally divided into Condensation type and Addition type,the biggest difference between the two is Condensation type will release low-molecular substance and Addition type will not,So Condensation type potting will shrink during curing and Addition type potting will not.

Technical Specification
 
Model Proportion
( Weight)
Viscosity-BF
( CP)
Color Viscosity-AF
( CP)
Density
g/ml
Surface Dry Time ( Min) Full Cure Time
( H)
Hardness
( shore A)
Dielectric Strength
kV/mm
MT-1801 101 2500/100 Black 2400 1.2 40-60 3-5 15 21
MT-1802 101 2400/100 Black 2300 1.1 40-60 3-5 15 21
MT-1803 101 2500/100 White 2400 1.2 40-60 3-5 15 21
MT-1804 101 2800/100 Black 2600 1.35 40-60 3-5 15 21
MT-1806 101 1800/100 Transparent 1600 1.0 40-60 6-8 15 21

* Viscosity, curing time can be adjusted according to user requirements

Application

It mainly used in circuit boards, LED power supply, LED outdoor lamps, automotive electronic modules, electrical appliances, light sources, lighting and ancillary devices for potting protection,and play the role of sealing, waterproof, insulation

Using Guide



Instruction
  • Before use, the A component is fully stirred evenly, B components in the sealed state shake evenly, and then according to the weight ratio of A:B=10:1, into the mixing tank mixing evenly. If the weight of the B component is more, the curing time is faster
  • Put the mixture into the container, If the depth is deep, suggest to vacuum deaeration , to prevent bubbles and pinholes after curing the adhesive surface
Caution

① Glue should be sealed storage. The mixture should be used once to avoid waste
② This product is not dangerous, but do not eat and into the eyes.
③ After a long period of storage, there will be precipitation in the glue. Please mix evenly to use and does not affect the performance
④ Glue exposure to a certain amount of the following chemical substances will make the glue does not solidify ( little amount of the following substances will not affect the curing)
  • N, P, S organic compounds
  • Ionic compounds of Sn, Pb, Hg, As and other elements
  • Containing alkynes and vinyl compounds
  • In order to avoid the above phenomenon, the use of the circuit board as far as possible to wipe clean the remaining rosin, try to use low lead content of solder. It can also use three anti - paint soaked, and then use glue
⑤ Before a large amount of use,Please try a small amount of trial to confirm Is it appropriate

Packing

11Kg/ set, 22KG/ set
Customized special package


Storage And Transport

① This product storage period of six months25℃).
② Such products are non hazardous and can be transported in general chemicals