Products

RTV Silicone Sealant 300ML

Electronic RTV silicone sealant is a single component room temperature curing silicone rubber, which has good adhesion For metal, glass, plastics and other materials.
  • Electronic Silica Gel-MSDSDownload
  • SGS-ROHS Report(RTV Silicone Sealant)2017Download
INQUIRY
Description
Detailed method of different products,please contact Salesman
Introduction


   Electronic RTV silicone sealant is a single component room temperature curing silicone rubber, which has good adhesion For metal, glass, plastics and other materials. The silica gel is elastomer after cured, which has anti cold alternate and aging resistance and insulation properties. The silica gel has excellent moisture resistance, high temperature resistance, earthquake resistance, corona resistance, anti leakage performance, which comply with RoHs directive requirements

Technical Specification
Model Color Mobility Surface Dry Time
( Min)
Full Cure Time
( H)
Tensile Strength
( Mpa)
Density (g/ml) Hardness
( shore A)
Volume Resistivity Operating Temperature
(℃)
MT-705A Translucent Non-Flowing 5~10 24 >1.2 1.02 30±2 3.5*1014 -40~150
MT-705B-ST Translucent Semi-Flowing 5~10 24 >1.0 1.02 20±2 3.5*1014 -40~150
MT-705B-T Transparent Flowing 5~10 24 >0.6 1.02 15±2 3.5*1014 -40~150
MT-704A White Non-Flowing 5~10 24 >1.2 1.25 30±2 3.5*1014 -40~150
MT-734 White Non-Flowing 5~10 24 >1.0 1.60 30±2 3.5*1014 -40~150
 
 
Model Color Mobility Surface Dry Time
( Min)
Full Cure Time
( H)
Tensile Strength
( Mpa)
Density (g/ml) Hardness
( shore A)
Volume Resistivity Operating Temperature
(℃)
MT-552 Black,White,Grey Non-Flowing 5~10 24 >1.2 1.30 30±2 3.5*1014 -40~150
MT-555-1 Black,White,Grey Non-Flowing 5~10 24 >1.0 1.45 50±2 3.5*1014 -40~150
MT-556 Black,White,Grey Non-Flowing 5~10 24 >0.6 1.60 40±2 3.5*1014 -40~150
MT-5704B Black,White,Grey Semi-Flowing 5~10 24 >1.2 1.45 50±2 3.5*1014 -40~150

Application

① Insulation seal for electrical switch
② Insulation seal for relays and other electronic components
③ LED lamp adhesive, waterproof, insulation, sealing

Using Guide

Silicone SealantSilicone SealantSilicone SealantSilicone Sealant

① Please make sure the coated surface is absolutely clean and dry,and remove the rust,dust and oil stains on the surface
before use.
② Cut the projecting part on the top of the tube,then squeeze out the glue on the objects and apply it evenly
③ If the thickness of glue applied on the objects ranges from 2mm to 4mm,it’s better to place the objects under indoor temperature and with 55% relative humidity,then it’ll cure naturally within 24 hours.But if the thickness of glue applied on the objects surpasses 6mm.it’ll takes at least 7 days to cure under the same condition.
④ Please store the glue sealed after used





Caution

① This product is non-toxic after completely cured , but should avoid contact with the eyes and children before curing
② working area maintain ventilation
③ If contact with the skin, wipe clean, and then rinse with water; if contact with eyes, immediately wash with water,  and go to the hospital to check

Packing

① 50 ml/tube, 200 tube/box
② 300 ml/tube,25 tube/box
③ 2600 ml/tube,4 tube/box
④ Customized special package

Storage And Transport

① This product should be stored in a dry, cool place, avoid rain, sun exposure, storage period of six months(25℃)。
② Such products are non hazardous and can be transported in general chemicals