Introduction
Electronic RTV silicone sealant is a single component room temperature curing silicone rubber, which has good adhesion For metal, glass, plastics and other materials. The silica gel is elastomer after cured, which has anti cold alternate and aging resistance and insulation properties. The silica gel has excellent moisture resistance, high temperature resistance, earthquake resistance, corona resistance, anti leakage performance, which comply with RoHs directive requirements
Technical Specification
Model |
Color |
Mobility |
Surface Dry Time
( Min) |
Full Cure Time
( H) |
Tensile Strength
( Mpa) |
Density (g/ml) |
Hardness
( shore A) |
Volume Resistivity |
Operating Temperature
(℃) |
MT-705A |
Translucent |
Non-Flowing |
5~10 |
24 |
>1.2 |
1.02 |
30±2 |
3.5*1014 |
-40~150 |
MT-705B-ST |
Translucent |
Semi-Flowing |
5~10 |
24 |
>1.0 |
1.02 |
20±2 |
3.5*1014 |
-40~150 |
MT-705B-T |
Transparent |
Flowing |
5~10 |
24 |
>0.6 |
1.02 |
15±2 |
3.5*1014 |
-40~150 |
MT-704A |
White |
Non-Flowing |
5~10 |
24 |
>1.2 |
1.25 |
30±2 |
3.5*1014 |
-40~150 |
MT-734 |
White |
Non-Flowing |
5~10 |
24 |
>1.0 |
1.60 |
30±2 |
3.5*1014 |
-40~150 |
Model |
Color |
Mobility |
Surface Dry Time
( Min) |
Full Cure Time
( H) |
Tensile Strength
( Mpa) |
Density (g/ml) |
Hardness
( shore A) |
Volume Resistivity |
Operating Temperature
(℃) |
MT-552 |
Black,White,Grey |
Non-Flowing |
5~10 |
24 |
>1.2 |
1.30 |
30±2 |
3.5*1014 |
-40~150 |
MT-555-1 |
Black,White,Grey |
Non-Flowing |
5~10 |
24 |
>1.0 |
1.45 |
50±2 |
3.5*1014 |
-40~150 |
MT-556 |
Black,White,Grey |
Non-Flowing |
5~10 |
24 |
>0.6 |
1.60 |
40±2 |
3.5*1014 |
-40~150 |
MT-5704B |
Black,White,Grey |
Semi-Flowing |
5~10 |
24 |
>1.2 |
1.45 |
50±2 |
3.5*1014 |
-40~150 |
Application
① Insulation seal for electrical switch
② Insulation seal for relays and other electronic components
③ LED lamp adhesive, waterproof, insulation, sealing
Using Guide




① Please make sure the coated surface is absolutely clean and dry,and remove the rust,dust and oil stains on the surface
before use.
② Cut the projecting part on the top of the tube,then squeeze out the glue on the objects and apply it evenly
③ If the thickness of glue applied on the objects ranges from 2mm to 4mm,it’s better to place the objects under indoor temperature and with 55% relative humidity,then it’ll cure naturally within 24 hours.But if the thickness of glue applied on the objects surpasses 6mm.it’ll takes at least 7 days to cure under the same condition.
④ Please store the glue sealed after used
Caution
① This product is non-toxic after completely cured , but should avoid contact with the eyes and children before curing
② working area maintain ventilation
③ If contact with the skin, wipe clean, and then rinse with water; if contact with eyes, immediately wash with water, and go to the hospital to check
Packing
① 50 ml/tube, 200 tube/box
② 300 ml/tube,25 tube/box
③ 2600 ml/tube,4 tube/box
④ Customized special package
Storage And Transport
① This product should be stored in a dry, cool place, avoid rain, sun exposure, storage period of six months(25℃)。
② Such products are non hazardous and can be transported in general chemicals