Products

Thermal conductive silicone sealant--MT-1301

Item No.: MT-1301A
Thermal conductive silicone sealant is mainly made of bonding agent and conductive particles.It is pasty mixture before applying,and solidifying in certain times and conditions.
  • MT-1301 Thermal Conductive Silicone Sealant—TDSDownload
  • MT-1301 Thermally Conductive Silica Gel-MSDSDownload
  • 导热硅胶SGS-ROHS报告(中文)2018Download
INQUIRY
Description
Introduction

    Thermal conductive silicone sealant is mainly made of bonding agent and conductive particles.It is pasty mixture before applying,and solidifying in certain times and conditions. Our company’s silica gel is one component room temperature vulcanized silicon rubber (save as “RTV 一 1”),has good adhesion,no need extra mechanical immobilization.Cured at normal temperature.The curing condition is simple and can be repaired.The cured thickness is generally between 4-5mm. But this gel is sensitive for the surface of radiator,the polluted surface of device or weak bonding force of radiator.

Technical Specification
Model Color Conductivity (W/m-k) Density (g/ml) Vdaf (%) Hardness
( shore A)
Breakdown Voltage (Kv/mm) Surface Dry Time
( Min)
Full Cure Time
( H)
Operating Temperature
()
Limit Temperature
()
MT-1301 White 1.0±0.2 1.68±0.1 <2.5 60-65 >10.0 2~5 12 -40~180 -50~250

Application

① It is widely used in power supply, chargers and other parts for the fixed, bonding, sealing, heat conduction
② LED lamp radiator and PCB for bonding and thermal conduction. Suitable for SMD Chips.
③ For other electronic, electrical components of the bonding,heat conduction


Using Guide

Thermal conductive silicone gelHeat sink silicone sealantthermal conductive silicone sealant

Caution

① Keep away from children
② After the opening of the silica gel, as far as possible to use
③ If contact with the skin, wipe clean, and then rinse with water; if contact with eyes, immediately wash with water, and go to the hospital to check

Packing

① 80g/tube,
200tube/box,NW:80g
150g/tube120tube/box,NW:150g
300ml/ tube25tube/box
2600ml/ tube4tube/box
⑤ Customized special
package

Storage And Transport

① This product should be stored in a dry, cool place, avoid rain, sun exposure, storage period of six months(25℃).
② Such products are non hazardous and can be transported in general chemicals



 
by MARTIN VARGHESE
Sep 16,2020
Maxtor MT-1301A Thermal Conductive Silicone Sealant - Net Wt 80G
Dear Sir, I need 2 Nos of above items how i purchase?, i am waiting your reply regards Martin Varghese Aden Tech Cont. P.O.Box 33767 Sharjah United Arab Emirates Tel : 00971 6 5348255 Mail: info@adencont.com
by R KUMAR
Sep 08,2020
1301A NEED
DEAR SIR, we are manufacturer the led lights and led driver
by R KUMAR
Sep 08,2020
1301A NEED
DEAR SIR, we are manufacturer the led lights and led driver
by Akshay Damare
Aug 14,2020
Product recommendation
Hello, Nice to get introduced with you ! We are an India based embedded design house working in the field of wearable and IoT solutions. We are working on a wearable design which shall be used for body temperature measurement. where we will be using an electronic chip for body temperature measurement and that electronic chip will be get sticked to steel plate with the help of thermally conductive adhesive with thermal conductivity upto 1W/mk. So we want the suggestion that can we use MT-1301 product from your product category. Please let me know if you can support adhesive for this application. Kindly revert ASAP. Hardware Design Engineer, ioGenies Solutions LLP, Pune. Mob No: +919689826158.
Review